Taylor Mittens Crochet Pattern

The Taylor Mittens Crochet Pattern is a cozy pair of mittens that will match your Taylor Beanie perfectly. They make for a very cozy set!

I don’t know about you, but when I think about crocheting something, I don’t often think about making myself a pair of mittens. Usually hats, scarves and blankets are the first thing that come to mind. But crochet mittens can be so cozy and wonderful to wear!

I feel like I am really into the crochet mittens this year! In fact I have decided to include two pairs in the Wonderful Hats Crochet Along this year. I also have another bonus pair that will be available after the event and then two more hat and mitten sets that will be available come November.

Crochet mittens can be so much fun to make. I find they take a little less time to make than a crochet hat and they are a fun project if you are looking to make something a little different.

The Taylor Mittens crochet pattern is the third accessory pattern in the Wonderful Hats Crochet along this year. These mitten are worked from the cuff to the top and I have written the pattern here in three adult sizes. Enjoy!

PDF copies are also available:

The Taylor Mittens crochet pattern will be written out in full below and it is free to follow on Rich Textures Crochet. If however you wish to add this pattern to your library and purchase an ad free PDF, you can do so from my Etsy and Ravelry Shops linked below:

CLICK HERE FOR THE TAYLOR MITTENS ON ETSY

CLICK HERE FOR THE TAYLOR MITTENS ON RAVELRY

Thank you so much for stopping by! Be sure to check back on Friday for the Taylor Mittens Crochet pattern. I also invite you to sign up for my email newsletter below so that you never miss a new free crochet pattern.

Happy Crocheting!
Sarah

Taylor Mittens Crochet Pattern:

Skill Level: Intermediate

Gauge: 16sts x 8 rows of hdc = 4 inches

Finished Size (Laid flat): Small: 9 x 3 inches Medium: 10 x 4 inches Large: 11 x 5 inches 

Yarn: Wool-Ease® by Lion Brand® Yarn (80% acrylic; 20% wool; 197 yds/180 m; 3oz/85 g; (4) Medium/worsted weight): 1-1.5 balls.

Hook: Size H/8 (5 mm) Hook. Adjust hook size if necessary to obtain correct gauge

Stitches and Abbreviations:

3rd Loop – Looking at the back of your half double crochet stitch, the “3rd loop” is the loop that runs just under the top back loop of the stitch.

Blo – Back Loop Only

Ch – Chain

Dc – Double Crochet

Dc2tog – Double Crochet Two Stitches Together

Hdc – Half Double Crochet

Hdc2tog – Half Double Crochet Two Stitches Together

Fpdc – Front Post Double Crochet

Fpdc2tog – Front Post Double Crochet Two Stitches Together

Fphdc – Front Post Half Double Crochet

Fphdc2tog – Front Post Half Double Crochet Two Stitches Together

Rpt – Repeat

Sc – Single Crochet

Sk – Skip

Sl St – Slip Stitch

Yo – Yarn Over

Pattern Notes:

• Pattern is written in American English terms.
• Cuff of mitten is worked in rows, body of the mitten is worked in rounds.
• Ch 1 at beginning of round does not count as stitch.
• Weave in ends as needed.
• OPTIONAL: Cuff of mitten may be worked using either single crochet stitches or half double crochet stitches instead of the slip stitches.
• To change the size of your mittens, work the first hdc round of the hat body in any multiple.
• Pattern size adjustments are written as follows for the cuff: Small (Medium, Large)

Free Crochet Pattern:

Cuff (Worked in rows):

All Sizes:

Ch 11 (12, 13).

Row 1: Sl st in the 2nd ch from hook and in each ch across.  Ch 1, turn.  (10 (11, 12) sl sts)

Row 2: Working in the blo, sl st in each st across.  Ch 1, turn.

Continue to repeat row 2 until work from the beginning measures approximately 6.5 (7, 7.5) inches.

Do not fasten off, but fold cuff so that two shorter ends meet. Now working through both thicknesses, sl st across working through the blo on each side. Do not fasten off, turn work right side out (so that the right side is facing you).

Now working around the edge of the cuff, continue working in rounds as follows:

Mitten Body (Worked in rounds):

Size Small: 

Rnd 1: Ch 1, evenly work 28 hdc all the way around.  Join with a sl st in the first st, do not turn. (28 sts)

Rnd 2: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.  

Rnd 3: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 4: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnds 5 – 6: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnds 7-10: Repeat rnds 3 – 6 once.

Rnd 11: Ch 1, fpdc in each st around until 5 sts remain, ch 1, leave the remaining sts unworked, join with a sl st in the 1st st. Ch 1, do not turn.

Rnd 12: Ch 1, fphdc in the 1st st and in each st until you come to the ch-1, hdc in each of the next ch-sts.  Join with a sl st in the 1st st.  Do not turn.

Rnds 13 – 14: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 15: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 16: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnds 17 – 18: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 19: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 20: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 21: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 22: Ch 1, working in the 3rd loop around, *hdc in each of the next 3 sts, hdc2tog; Rpt from * around ending with a hdc in the final st, join with a sl st in the 1st st. Do not turn.

Rnd 23: Ch 1, working in the 3rd loop around, *hdc in each of the next 2 sts, hdc2tog; Rpt from * around, join with a sl st in the 1st st. Do not turn.

Rnd 24: Ch 1, working in the 3rd loop around, *hdc in the next st, hdc2tog; Rpt from * around, join with a sl st in the 1st st. Do not turn.

Fasten off leaving a long tail.  Using the long tail, sew the top of the mittens closed. Fasten off and weave in your ends.  Continue to work the mitten thumb.

Small Mitten Thumb:

Join your yarn in any stitch around the thumb opening.  Ch 1.

Rnd 1: Evenly work 8 hdc all the way around the thumb opening.  Join with a sl st in the 1st st.

Rnds 2 – 5: Ch 1, working in the 3rd loop around, hdc in each st around, join with a sl st in the first st.

Fasten off leaving a long tail.  Use the long tail to sew the top of your thumb closed, weave in your ends.

Size Medium: 

Rnd 1: Ch 1, evenly work 32 hdc all the way around.  Join with a sl st in the first st, do not turn. (32 sts)

Rnds 2-3: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.  

Rnd 4: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 5: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnds 6 – 7: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnds 8-11: Repeat rnds 4 – 7 once.

Rnd 12: Ch 1, fpdc in each st around until 6 sts remain, ch 2, leave the remaining sts unworked, join with a sl st in the 1st st. Ch 1, do not turn.

Rnd 13: Ch 1, fphdc in the 1st st and in each st until you come to the ch-2, hdc in each of the next ch-sts.  Join with a sl st in the 1st st.  Do not turn.

Rnds 14 – 15: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 16: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 17: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnds 18 – 21: Repeat rounds 14-17.

Rnds 22-23: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 24: Ch 1, working in the 3rd loop around, *hdc in each of the next 3 sts, hdc2tog; Rpt from * around ending with a hdc in the final st, join with a sl st in the 1st st. Do not turn.

Rnd 25: Ch 1, working in the 3rd loop around, *hdc in each of the next 2 sts, hdc2tog; Rpt from * around, join with a sl st in the 1st st. Do not turn.

Rnd 26: Ch 1, working in the 3rd loop around, *hdc in the next st, hdc2tog; Rpt from * around, join with a sl st in the 1st st. Do not turn.

Fasten off leaving a long tail.  Using the long tail, sew the top of the mittens closed. Fasten off and weave in your ends.  Continue to work the mitten thumb.

Medium Mitten Thumb:

Join your yarn in any stitch around the thumb opening.  Ch 1.

Rnd 1: Evenly work 10 hdc all the way around the thumb opening.  Join with a sl st in the 1st st.

Rnds 2 – 6: Ch 1, working in the 3rd loop around, hdc in each st around, join with a sl st in the first st. 

Fasten off leaving a long tail.  Use the long tail to sew the top of your thumb closed, weave in your ends.

Size Large: 

Rnd 1: Ch 1, evenly work 36 hdc all the way around.  Join with a sl st in the first st, do not turn. (36 sts)

Rnds 2-4: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.  

Rnd 5: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 6: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnds 7 – 8: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnds 9-12: Repeat rnds 5 – 8 once.

Rnd 13: Ch 1, fpdc in each st around until 7 sts remain, ch 3, leave the remaining sts unworked, join with a sl st in the 1st st. Ch 1, do not turn.

Rnd 14: Ch 1, fphdc in the 1st st and in each st until you come to the ch-3, hdc in each of the next ch-sts.  Join with a sl st in the 1st st.  Do not turn.

Rnds 15 – 16: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 17: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 18: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnds 19 – 20: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 21: Ch 1, fpdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 22: Ch 1, fphdc in the 1st st and in each st around.  Join with a sl st in the 1st st.  Do not turn.

Rnd 23-25: Ch 1, working in the 3rd loop around, hdc in the 1st st and in each st around.  Join with a sl st in the top of the 1st st.  Do not turn.

Rnd 26: Ch 1, working in the 3rd loop around, *hdc in each of the next 3 sts, hdc2tog; Rpt from * around ending with a hdc in the final st, join with a sl st in the 1st st. Do not turn.

Rnd 27: Ch 1, working in the 3rd loop around, *hdc in each of the next 2 sts, hdc2tog; Rpt from * around, join with a sl st in the 1st st. Do not turn.

Rnd 28: Ch 1, working in the 3rd loop around, *hdc in the next st, hdc2tog; Rpt from * around, join with a sl st in the 1st st. Do not turn.

Fasten off leaving a long tail.  Using the long tail, sew the top of the mittens closed. Fasten off and weave in your ends.  Continue to work the mitten thumb.

Large Mitten Thumb:

Join your yarn in any stitch around the thumb opening.  Ch 1.

Rnd 1: Evenly work 12 hdc all the way around the thumb opening.  Join with a sl st in the 1st st.

Rnds 2 – 7: Ch 1, working in the 3rd loop around, hdc in each st around, join with a sl st in the first st.

Fasten off leaving a long tail.  Use the long tail to sew the top of your thumb closed, weave in your ends.

Video Tutorial:

The photographs and pattern contained in this document are the property of Rich Textures Crochet.

This pattern is for personal use only.

No unauthorized reproduction, in whole or in part, or distribution of this pattern or content is permitted.  ALL FINISHED PRODUCTS from this pattern can be used for local sales and sold online.

Thank you so much for supporting Rich Textures Crochet! To stay in touch or see more great products, be sure to visit me on Facebook and Instagram (Rich Textures Crochet).  Thanks again! Happy Crocheting!