Brady the Bear Crochet Pattern

The Brady the Bear Crochet Pattern is a friendly crochet bear that is the perfect size for giving hugs and snuggling with!

This past Christmas my children asked me to crochet them a special gift.  One of them suggested that is be with the softest yarn that I could find and another suggested that the gift be something they could snuggle with – and thus the Crochetuggle was born!

This post contains affiliate links.  This means that when you make a purchase through one of these links, Rich Textures Crochet will earn a small commission at no additional cost to yourself.  Thank you for supporting Rich Textures Crochet!

What is a Crochetuggle? It is a friendly, plush crochet animal that you can hug and snuggle with.  Brady the Bear is fairly large measuring about 16 inches tall.  Crochetuggles are easy to work, made with a jumbo size yarn in basic crochet stitches.  They work up quickly! Each of my Crochetuggles only took a few hours to work.

There are more Crochetuggles to come! Brady the Bear is the first of four Crochetuggles that are new to my website.  They will all be revealed over the coming weeks.  So be sure to subscribe to my email newsletters and follow me unsocial media if you want to be informed of when the patterns are published.

The Materials:

As mentioned above, Brady the Bear is worked in a jumbo sized yarn.  In my samples I am using the Sweet Snuggles by Loops & Threads®.  This yarn is so soft and cosy! It really makes for a soft and plush bear.  I used three colours and more details about the yarn can be found under the materials list below.

Along with the yarn you will need a 10 mm crochet hook.  If you would like a slightly smaller bear I recommend dropping down to an 8 mm crochet hook.

PDF Copies are also Available:

The pattern will be written out in full below and will forever remain free when viewed here on Rich Textures Crochet, and the written instruction will be followed by a video tutorial.  However if you would like to add this pattern to your library or purchase an ad free PDF, you may do so from either my Etsy or Ravelry Shop linked below:

Click Here for the Brady the Bear Pattern on Etsy

Click Here for the Brady the Bear Pattern on Ravelry

Thank you for stopping by and I look forward to seeing you again soon! If you haven’t already, I invite you to explore some of my other popular crochet patterns including the Midwinter Blanket Crochet Pattern and the Orchid Shawl Crochet Pattern.

Happy Crocheting!

Sarah

Brady the Bear Crochet Pattern:

Skill Level: Easy

Gauge:  7 x 7 rounds of sc = 4 inches

Finished Size: Approximately 16 x 13 inches

Yarn: Sweet Snuggles by Loops & Threads® (109 yds/170 m; 250g/8.8 oz; 100% polyester; (4) worsted weight).  You will need 1 ball Denim (Colour A), 1 ball White (Colour B), Small amount of Black (Colour C)

Hook: Size N/15 (10 mm) hook. 

Notions: Yarn Needle, 5 stitch markers, polyfill (amount will vary depending on how firm you would like the stuffing.  I used approximately 10 oz/crochetuggle.  What is a “Crochetuggle”? What you get when you mix crochet with hugs and snuggles!

Stitches and Abbreviations:

Ch – Chain

Rpt – Repeat

Sc – Single Crochet

Sc2tog – Single Crochet Two Stitches Together

Sk – Skip

Sl st – Slip stitch

Yo – Yarn over

Pattern Notes:

• Pattern is written in American English terms.
• Pattern is worked in rounds.
• Ch 1 at beginning of round does not count as stitch.
• Weave in ends as needed.
• Do not turn unless stated otherwise.
• Body of the crochetuggle is worked to start, body parts and accents worked following and sewn/embroidered into place.
• When working the bear’s body, the front of the single crochet stitches will be on the inside of the bear.  The “right” side is the backside of the stitch.

Free Crochet Pattern:

Body:

With Colour A, Ch 11

Rnd 1: Sc in 1st (mark this st) and in each across to last, in final st sc 3 (mark 1st and last sts), working along the opposite side of the foundation ch, sc in each across to the last st, 2 sc in the final st (mark 1st st).  Do not join (mark the 1st st as your work progresses), do not turn.  (22 sts)

Rnd 2: 3 sc in the 1st st (mark the 1st st [and the 1st st of each rnd] and 2nd st), sc across to the next st marker, 3 sc in the next st (mark the 2nd st), sc in each st across to the next st marker, 3 sc in the next st (mark the 2nd st), sc across to the next st marker, 3 sc in the next st (mark the 2nd st), sc across to the 1st st.  (30 sts)

Rnd 3: Sc in the 1st st (mark this st) and in each st across to the next st marker, 3 sc in the next st (mark the 2nd st), sc in each st across to the next st marker, 3 sc in the next st (mark the 2nd st), sc across to the next st marker, 3 sc in the next st (mark the 2nd st), sc across to the next st marker, 3 sc in the next st (mark the 2nd st), sc in each st across to the 1st st.  (38 sts)

Rnd 4: Rpt rnd 3. (46 sts)

Rnd 5: Rpt rnd 3.  (54 sts)

At this time you may remove the 4 corner stitch markers, the marker for the 1st st remains.

Rnds 6-15: Sc in the 1st st (mark this st) and in each st around.  Do not join or turn until the end of rnd 15, join with a sl st in the 1st st.  Fasten off colour A.  Join colour B.  (54 sts)

Rnds 16-17: With colour B, sc in the 1st st (mark this st) and in each st around.  Do not join, do not turn.  (54 sts)

Rnd 18: *Sc in each of the next 7 sts, sc2tog; Rpt from * around.  Do not join, do not turn.  (48 sts)

Rnd 19: Sc in each st around.  Do not turn, do not join. (48 sts)

Rnd 20: *Sc in each of the next 6 sts, sc2tog; Rpt from * around.  Do not join, do not turn.  (42 sts)

Rnd 21: Sc in each st around.  Do not turn, do not join. (42 sts)

Rnd 22: *Sc in each of the next 5 sts, sc2tog; Rpt from * around.  Do not join, do not turn.  (36 sts)

Rnd 23: Sc in each st around.  Do not turn, do not join. (36 sts)

Rnd 24: *Sc in each of the next 4 sts, sc2tog; Rpt from * around.  Do not join, do not turn.  (30 sts)

Rnd 25: Sc in each st around.  Do not turn, do not join. (30 sts)

DO NOT FASTEN OFF.  After the following are attached, you will return to the head and finish off.

To attach eye patch, tail and ears proceed as follows.  Embroider eyes, nose and mouth.

Eye Patch:

With colour A, ch 2.

Rnd 1: Work 6 sc into the 2nd ch from your hook.  Do not join but mark the 1st st with a st marker and move as your work progresses.  (6 sts)

Rnd 2: Ch 1, work 2 sc in each st around, join with a sl st in the 1st st.  (12 sts)  Fasten off leaving a long tail that you will use to sew the eye patch in place.

Place eye patch in position and sew into place using the long tail.  With a little bit of colour C, embroider the eyes, nose and mouth as desired.

Tail:

With colour A, ch 2.

Rnd 1: Work 6 sc into the 2nd ch from your hook.  Do not join but mark the 1st st with a st marker and move as your work progresses.  (6 sts)

Rnd 2: Ch 1, work 2 sc in each st around.  Do not join, do not turn. (12 sts)  

Rnd 3: Ch 1, *sc in the next st, 2 sc in the next st; Rpt from * around.  Join with a sl st in the 1st st.  (18 sts). Fasten off leaving a long tail that you will use to sew the tail in place.

Position tail on the back of the bear and add a little bit of fibre fill under.  Using the long tail, sew the tail into place.  Fasten off, weave in your ends.

Ears (Worked in rows, make 2):

Front (with colour B), ch 5.

Row 1: Sc in the 2nd ch from your hook and in each st across.  Ch 1, turn. (4 sts)

Row 2: Sc in the 1st st and in each st across.  Ch 1, turn.  (4 sts)

Row 3: Sc2tog in the 1st 2 sts, sc2tog in the next 2 sts.  (2 sts) Fasten off, weave in your ends.

Back (with colour A), ch 6.

Row 1: Sc in the 2nd ch from your hook and in each st across.  Ch 1, turn. (5 sts)

Rows 2-3: Sc in the 1st st and in each st across.  Ch 1, turn.  (5 sts)

Row 4: Sc2tog in the 1st 2 sts, sc in the next st, sc2tog in the next 2 sts.  (3 sts) Fasten off, weave in your ends.

Now taking your front side, lay it over the back side with the wrong sides together.  Join colour A yarn with a sl st in one of the bottom corners (row 1).  Work 3 sc along the side, 3 sc along the top, 3 sc down the next side.  Fasten off, leaving a long tail.  Position the ear in place at the top of the bear body and sew.  Repeat for the second side.  Fasten off, weave in your ends.

Close the Top of the Bear head:

Rnd 26: *Sc in each of the next 3 sts, sc2tog; Rpt from * around.  Do not join, do not turn.  (24 sts)

Rnd 27: Sc in each st around.  Do not turn, do not join. (24 sts)

Rnd 28: *Sc in each of the next 2 sts, sc2tog; Rpt from * around.  Do not join, do not turn.  (18 sts)

Fill bear with fibre fill to the desired plushiness.  

Rnd 29: *Sc in the next st, sc2tog; Rpt from * around.  Do not join, do not turn.  (12 sts)

Rnd 30: Sc2tog in each st around.  Join with a sl st in the 1st st.  (6 sts) Fasten off leaving a long tail and use this tail to sew the top of your bear closed.

Fasten off, weave in your ends.

Video Tutorial:

 

 

The photographs and pattern contained in this document are the property of Rich Textures Crochet.  

This pattern is for personal use only.  

No unauthorized reproduction, in whole or in part, or distribution of this pattern or content is permitted.  ALL FINISHED PRODUCTS from this pattern can be used for local sales and sold online.

Thank you so much for supporting Rich Textures Crochet! To stay in touch or see more great products, be sure to visit me on Facebook and Instagram (Rich Textures Crochet).  Thanks again! Happy Crocheting!